JLG SkyTrak 10042

The JLG SkyTrak 10042 is a high-capacity telehandler rated at 10,000 lb nameplate capacity at a 24-inch load center. That puts it in the capacity range best suited for lumber yards, steel handling, and bulk outdoor material movement. Keep in mind that real-world working capacity drops below the nameplate when lifting above standard mast height, handling off-center loads, or running attachments like sideshifters or fork positioners — plan on the derated capacity from the manufacturer load chart for your actual use.

Gas is well-suited for outdoor and mixed-use applications where propane infrastructure is unavailable.

Advantages: widely available fuel, strong power output, lower upfront cost than diesel.

Tradeoffs: less economical than propane or electric over the truck's lifespan, emissions similar to diesel.

Gasoline forklifts fall into ITA Class IV or V depending on tire type. For a deeper power type comparison, see our Electric vs Propane Forklifts guide.

Operations that most commonly run the JLG SkyTrak 10042 or comparable high-capacity telehandlers include:

• Loading docks with heavy raw materials
• Outdoor yards and lumber handling
• Steel, concrete, and other oversized industrial loads

New units in this capacity class run $75,000 and up depending on configuration; used units vary widely based on hours and application.

Leasing is worth considering if your accounting prefers operating expenses, or if you want a factory-backed service contract bundled in. Operating leases run 36–60 months with a fair-market-value buyout; capital leases let you own at the end with more up-front.

If the JLG SkyTrak 10042 fits your operation, the fastest path is to request quotes from three dealers with identical specs — capacity, mast height, tire type, and any attachments — then compare. Pricing can swing 10–20% on identical specs across dealers, and the dealer behind the truck matters more than the brand itself (response time, PM contract pricing, and loaner unit availability all vary).

For buyers evaluating used units, work through our used forklift inspection checklist before committing — hour meter reading, mast channel wear, and hydraulic drift under load are the three items that most commonly kill a used purchase after the fact.

For the regulatory side, every operator of a powered industrial truck must be OSHA-certified under 29 CFR 1910.178, with recertification every 3 years. See our OSHA certification guide for what a compliant training program covers.