JLG R1385

The JLG R1385 is a high-capacity telehandler rated at 13,200 lb nameplate capacity at a 24-inch load center. That puts it in the capacity range best suited for lumber yards, steel handling, and bulk outdoor material movement. Keep in mind that real-world working capacity drops below the nameplate when lifting above standard mast height, handling off-center loads, or running attachments like sideshifters or fork positioners — plan on the derated capacity from the manufacturer load chart for your actual use.

New units in this capacity class run $75,000 and up depending on configuration; used units vary widely based on hours and application.

Leasing is worth considering if your accounting prefers operating expenses, or if you want a factory-backed service contract bundled in. Operating leases run 36–60 months with a fair-market-value buyout; capital leases let you own at the end with more up-front.

If the JLG R1385 fits your operation, the fastest path is to request quotes from three dealers with identical specs — capacity, mast height, tire type, and any attachments — then compare. Pricing can swing 10–20% on identical specs across dealers, and the dealer behind the truck matters more than the brand itself (response time, PM contract pricing, and loaner unit availability all vary).

For buyers evaluating used units, work through our used forklift inspection checklist before committing — hour meter reading, mast channel wear, and hydraulic drift under load are the three items that most commonly kill a used purchase after the fact.

For the regulatory side, every operator of a powered industrial truck must be OSHA-certified under 29 CFR 1910.178, with recertification every 3 years. See our OSHA certification guide for what a compliant training program covers.